Aiwa XR-MD95 Stereo System User Manual


 
SPECIFICATIONS
MAIN UNITS
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Inputs
outputs
Compact disc player section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
MD recorder section
Scanning method
Recording system
Rotation speed
Sampling frequency
No. of channels
A-D, D-A converter
Frequency
Wow and flutter
SPEAKER SYSTEM
Cabinet type
Speakers
Output sound pressure level
Dimensions (W x H x D)
Weight
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz
step)
531 kHz to 1602 kHz (9 kHz step)
350 pVlm
Loop antenna
16 watts per channel
RMS at 8 ohms, from 60 Hz to
20 kHz, with no more than 1%
Total Harmonic Distortion
0.1 % (10 W, 1 kHz, 8 ohms, DIN
AUDIO)
TAPE IN: 500 mV
AUX IN: 500 mV
SUPER WOOFER: 1.7 V
SPEAKERS: accept speakers of
8 ohms or more
LINE OUT 340 mV
PHONES (stereo mini jack):
accepts headphones of 32 ohms
or more
Semiconductor laser (k= 780 nm)
1 bit dual
85 dB (1 kHz, O dB)
0.05 ‘4 (1 kHz, O dB)
Unmeasurable
Non-contact optical scanner
(Semiconductor laser application)
Magnetic polarity modulation
overwrite system
Aprox, 400-900 rpm (CLV)
44.1 kHz
Stereo:
2 channels
Monaural:
1 channel
1-bit
20-20000
HZ +0.2 --1.5 dB
Unmeasurable
2 way, bass reflex (magnetic
shielded type)
Woofer:
100 mm (4 inches) cone type
Tweeter:
25 mm (1 inch) cone type
8 ohms
87 dBIWlm
140x 202x 190mm
(5
5/8x8x 7 1/2inches)
1.9 kg (4 lb. 3
OZ)
General
Power requirements
120 VAC, 60
Hz
Power consumption
45
w
Dimensions
CD player/MD recorder unit
(W XHXD)
144x 101.5 x176. I mm
(5 3/,x4x 7 inches)
Tuner/amplifier unit
144x 101.5 x208mm
(5 3/,x4x 8 ‘/, inches)
Weight
CD player/ MD recorder unit
1.45 kg (3 lb. 3
OZ)
Tuner / amplifier unit
2.4 kg (5 lb. 5
OZ)
Specifications and external appearance are subject to change
without notice.
o US AND FOREIGN PATENTS LICENSED FROM DOLBY
LABORATORIES LICENSING CORPORATION.
LMMSYSTEM
The word “BBE” and the “BBE symbol” are trademarks of BBE
Sound, Inc.
Under license from BBE sound, Inc.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules, These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for helo.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
ENGLISH
31