Filter
Top Products
MD GUIDE MESSAGES
Message Cause
Solution
Blank Disc
Nothing is recorded on the disc.
—
Can’t Edit
Tracks are too short to be joined up. See “THE LIMITATIONS OF MINI DISC” on page 13.
The combine function was used while playing
back the first track.
The divide function is used at the beginning of the
track.
Disabled.
The combine function was used to join a track
recorded in monaural with a track recorded in
stereo.
Disc Error
The disc is damaged by scratches.
The unit received a strong shock during a TOC
reading.
Replace the disc.
Do not subject the disc to strong shocks during a
TOC reading.
Disc Full
There is not enough time to record on the disc. Ret31ace the disc with another recordable disc.
Temp Over
The temperature of the unit is too high.
The surrounding temperature is too high or too
low,
Caution!
The unit operates abnormally due to a scratched
disc or a strong shock.
PB DISC A prerecorded disc is attempted to edit.
Protected
The disc is record-protected,
TOC
Full There are too many tracks or emphasis data to be
recorded or edited, or there is no room on the
disc.
Mecha Err Error occurs in the loading mechanism.
(All functions will be disabled.)
Emergency Recording is no longer possible because there are
scratches on the disc or the unit was subjected to
a strong shock during recording.
Can’t Copy Recording is not possible due to SCMS (see page
13).
MD Error
An error occurred in the MD unit of this unit.
UTOC Error An error occurred in the TOC of the MD because
the unit was subjected to a strong shock during
recording, or during recording or reading of the
TOC.
Leave the unit in a cool place for a while before
operating it again.
Operate the unit at moderate room temperature.
Replace the disc. Do not subject the unit to a
strong shock.
Replace the disc with a recordable one.
Slide the record-protect tab on the disc, (See page
16.)
Erase tracks.
Turn the power off and disconnect the AC cord
once. Then turn it on again.
If this message still appears, consult your local
Aiwa dealer.
Exchange the MD,
Do not subject the unit to strong shocks.
Contact an Aiwa service representative.
Exchange the MD,
Do not subject the unit to strong shocks during
recording, or during recording or reading of the
TOC.
30 ENGLISH