Aiwa LCX-357 Stereo System User Manual


 
En
ENGLISH
15
PROGRAMMED EDIT
RECORDING
f,g
s
2
3,7
4,5
8
1
2
FUNCTION
f,g
s
Programmed edit function enables CD recording while checking
the remaining time on each side of the tape as the tracks are
programmed.
NOTE
The programmed edit recording will not start from a point halfway
in the tape. The tape must be recorded from the beginning of
either side.
1
Insert the tape into the deck.
Insert the tape with the side to be recorded on first facing out
from the unit.
2
Press CD, and load the disc.
You can press FUNCTION on the remote control repeatedly
to select the CD function.
3
Press MODE four times.
4
Press the numbered buttons to designate the tape
length.
10 to 99 minutes can be specified.
Example: When using a 60-minute tape, press 6 and 0.
f and g buttons are also available to designate the
tape length.
5
Press the numbered buttons to program a track.
Example: To select the 10th track, press +10 and 0.
6
Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time
cannot be programmed.
7
Press MODE to select side B and program the
tracks for side B.
After confirming B on the display, repeat step 5.
8
Press w to start recording.
The tape is rewound to the beginning of the front side, the
lead segment is played through for 10 seconds, and recording
starts. When recording on the front side (A) ends, recording
on the back side (B) starts.
To stop recording
Press s. Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press MODE to select side A or B, and press
g repeatedly.
To change the program of each side
Press MODE to select side A or B, and press s to clear the
program of the selected side. Then program tracks again.
To clear the edit program
Press s twice.
NOTE
Recording is prohibited if the erasure prevention tab on either
side of the tape is broken off.
Program number
Selected track
number
Remaining time of side A
Programmed tracks
Tape side B (back side)
Track number
Program number
Programmed tracks
RECORDING