Filter
Top Products
En
ENGLISH
11
CD PLAYING
REPEAT PLAY
One or all the tracks can be played repeatedly.
Press REPEAT on the remote control to display
“REPEAT 1” or “REPEAT ALL.”
To repeat the current track only, select “REPEAT 1.”
To repeat all the tracks, select “REPEAT ALL.”
To cancel repeat play, press REPEAT to turn off “REPEAT.”
NOTE
• The random play can be performed during “REPEAT ALL” mode.
• If the random play mode is activated during “REPEAT 1” play
mode, the “REPEAT 1” play mode will be canceled and “REPEAT
ALL” play mode is selected instead.
• To repeat only selected tracks, select the “REPEAT ALL” play
mode and program the desired tracks (see below). You can
program the desired tracks first before selecting the “REPEAT
ALL” play mode.
PROGRAMMED PLAY
Up to 30 tracks can be programmed from the loaded disc.
Use the remote control.
s
g
s
g
d
2
1
4
1
Press MODE repeatedly so that “M” flashes on
the display.
2
Press the numbered buttons to program a track.
Example:
To select the 12th track, press +10 and 2.
To select the 20th track, press +10, +10 and 0.
3
Repeat step 2 to program other tracks.
4
Press c to start play.
To check the program
Each time g is pressed in stop mode, a track number and
program number will be displayed.
To clear the program
Press s in stop mode.
To add tracks to the program
Before playing, repeat step 2. The track will be programmed after
the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
NOTE
• During programmed play, the following operations cannot be
performed:
–Random play
–One-track repeat (REPEAT 1)
–Direct selection of the tracks with the numbered buttons
• If the programmed time is more than 99:59 minutes, or the disc
track number 31 and above is programmed, the display shows
“--:--” as the total playing time.
Program number
Selected track
number
Total playing time of
the selected tracks
Total number of
selectd tracks