Filter
Top Products
To check the specified time
Press the TIMER button on the remote control. The timer-on
time flashes for 2 seconds. However, the duration for the timer-
activated period will not be displayed.
‘To cancel timer standby
mode temporarily
Press the TIMER button on the remote control twice to turn off
0.
Using the unit while the timer is set
You can use the unit normally after setting the timer.
Before turning off the power, repeat step 4 to prepare the source,
and adjust the volume.
m
“ Timer playback will not begin unless the power is turned off.
● Connected equipment cannot be turned on and off by the built-
in timer of this unit, Use an external timer.
● When power is interrupted, ~ display disappears and the clock
flashes. Reset the clock and set the timer again.
SETTING THE SLEEP TIMER
1
2
The unit can be turned off automatically at a specified time.
Use the remote control
1
2
Press the SLEEP button.
Within 4 seconds, press the +4 or >F button
to specify the time ‘until the power is turned off.
Each time the button is pressed, the time changes between 5
and 240 minutes in 5-minute steps.
To check the time remaining until the power is turned
off
Press the SLEEP button once. The remaining time is displayed
for 4 seconds.
To cancel the sleep timer
Press the SLEEP button twice so that “SLEEP” on the display
disappears.
m
If the unit is turned off during tape playback, the P button is
kept pressed. Press the
■/4 button to release the b button.
ENGLISH
10