Filter
Top Products
ENGLISH
33
En
SPECIFICATIONS
Main unit
FM tuner section
Tuning range 87.5 MHz to 108 MHz
Usable sensitivity (IHF) 16.8 dBf
Antenna terminals 75 ohms (unbalanced)
AM tuner section
Tuning range 530 kHz to 1710 kHz (10 kHz
step)
531 kHz to 1602 kHz (9 kHz step)
Usable sensitivity 400 µV/m
Antenna Loop antenna
Amplifier section
Power output 25 W + 25 W (100 Hz to 10 kHz,
T.H.D. less than 1%, 6 ohms)
30 W + 30 W (1 kHz, T.H.D. 10%,
6 ohms)
Inputs AUX/VIDEO IN: 310 mV
DIGITAL IN:
Outputs SUPER WOOFER: 1.2 V
SPEAKERS: accept speakers of
6 ohms or more
PHONES (stereo mini jack):
accepts headphones of 32 ohms
or more
Compact disc player section (CD player)
Laser Semiconductor laser (λ = 780 nm)
D-A converter 1 bit dual
Signal-to-noise ratio 85 dB (1 kHz, 0 dB)
Harmonic distortion 0.05 % (1 kHz, 0 dB)
Wow and flutter Unmeasurable
Compact disc recorder section (CD-R/RW player/recorder)
Laser Semiconductor laser
(λ = 785 ±5 nm)
Recording method Track at Once
Sampling frequency 44.1 kHz
Harmonic distortion Play: 0.05 % or less (1 kHz, 0 dB)
Digital record: 0.05% or less
(1 kHz, 0 dB)
General
Power requirements 120 V AC, 60 Hz
Power consumption 90 W
Standby power consumption 1.5 W (power-economizing mode
set to ON or AUTO)
Dimensions of main unit (W × H × D)
177.6 × 265.0 × 333.0 mm
(7 × 10
1
/2 × 13 in.)
Weight of main unit 6.0 kg
(13 lbs 4 oz.)
Speaker system
Cabinet type 2 way, bass reflex (magnetic
shielded type)
Speakers Woofer:
130 mm
Tweeter:
22 mm dome type
Impedance 6 ohms
Output sound pressure level 86 dB/W/m
Dimensions (W × H × D) 155 × 254 × 210 mm
(6
1
/8 × 10 × 8
3
/8 in.)
Weight 2.6 kg
(5 lbs 12 oz.)
Specifications and external appearance are subject to change
without notice.
The word "BBE" and the "BBE symbol" are trademarks of BBE
Sound Inc.
Under licence from BBE Sound Inc.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's right
or authority to operate this product.
GENERAL