Filter
Top Products
Tape – Recording
19
GB
You can record just the portions you like from a
CD, tape or radio program on a tape.
You can also record from connected
components (see “Hooking up optional
components” on page 30).
Use buttons on the unit for the operation.
1 Load a recordable tape.
2 Press FUNCTION repeatedly to select
the desired source to record.
• CD: To record from this system’s CD
player.
• FM or AM: To record from this system’s
tuner.
• AUX: To record from the optional
component connected to the AUX IN
jacks.
• PC: To record from the personal
computer connected to the USB port.
3 Press z REC PAUSE/START.
“REC” flashes and the tape deck stands by
for recording.
4 Press DIRECTION repeatedly until g
appears to record on one side or h (or
j) to record on both sides.
5 Press TAPE nN repeatedly to select
recording side.
If you select both sides recording or front
side recording, press TAPE nN to light
up the N indicator. If you record on the
reverse side, press TAPE nN again to
light up the n indicator.
6 Press z REC PAUSE/START, then start
playing the desired source to record.
Recording starts.
To stop recording
Press x.
Notes
• You cannot listen to other sources while recording.
• If you press CD, TUNER BAND, TAPE or
FUNCTION during recording and select a sound
source different from the sound source being
recorded, the recording stops.
Tips
• When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
• For recording from the tuner:
If noise is heard while recording from the tuner,
move the respective antenna to reduce the noise.
Recording on a tape
manually
— Manual Recording