Filter
Top Products
CD/MP3 – Play
13
GB
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed tracks
onto a cassette tape (page 18).
1 Press CD (or FUNCTION repeatedly) to
switch the function to CD.
2 Press PLAY MODE in stop mode
repeatedly until “PGM” appears.
3 Press DISC SKIP (or DISC 1 – 5 on the
unit) to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 with “AL” displayed.
4 Press . or > repeatedly until the
desired track number appears.
When programming the MP3 audio tracks,
press ALBUM – or + to select album, then
press . or > repeatedly until the
desired track number appears.
5 Press ENTER (or PLAY MODE).
The track is programmed.
The step number appears, followed by the
last programmed track number.
6 Program additional discs or tracks.
7 Press N (or CD NX on the unit).
Program Play starts.
Other operations
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press CD
(or FUNCTION repeatedly) to switch the function to
CD, then press N (or CD NX on the unit). When
you eject a disc after programming tracks from
multiple discs, only the tracks contained on the
ejected disc are deleted from the program.
• “– –.– –” appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 audio track.
Creating your own
program
— Program Play
PLAYTITLEID3TRKALBM
AUTOPRESETMP3 MONOSTEREO TUNEDTRACKALBUM
DISC S ALBM REP1 PGM SHUF
TREBLE
LEVEL R i - Bass
BASS
0
0
LEVEL L
SYNC
REC
ALL
SLEEPREC
1
2
3
4
5
1
Selected track number
Total playing time
To program Repeat steps
Other discs 3 and 5
Other tracks on the
same disc
4 and 5
Other tracks on
other discs
3 to 5
To Do this
Cancel Program Play Press PLAY MODE in
stop mode repeatedly until
“PGM” disappears.
Clear a track from the end Press CLEAR in stop
mode.