Filter
Top Products
CONNECTIONS
CONNECTING EQUIPMENT
Jacks and plugs of the connecting cord are color-coded as
follows:
Before connecting the AC cord
Red jacks and plugs : For the right channel of audio signals
The rated voltage of your unit shown on the rear panel is 120 V
White jacks and plugs: For the left channel of audio signals
AC. Check that the rated voltage matches your local voltage.
Yellow jacks and plugs: For video signals
IMPORTANT
m
Connect the speakers, antennas, and all other external
Insert the uluas fully into the iacks. Loose connections may
equipment first. Then connect the AC cord at the end.
produce a hu;ming _soundor o_thernoise interference, -
The numbers in the illustration below correspond to the following details.
@Surround speaker
\
--, 11111
@.Speaker system A
Right
Left
J
I
@Speaker system B
Right
Left
@FM antenna
REAR
@AM antenna
to an AC outlet +=
L
to VIDEO IN
(Video 2)
Video 2 or
LD/MD nlaver
MD(?I I I
,-,3= -=: , --,
-— . . ..
VIDEbIN L AUDIOINRI
~:mwde
‘raeJJ
to&OOUTP”T
‘~
,OVIDEO-N
* When connecting a monaural wdeor use a
stereo-mono connecting cord (not supplied).
Turntable
-- ‘ )-*
to OUTPUT __
3 ENGLISH