Filter
Top Products
Main unit CX-ZL31
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Mid-high frequency amplifier
Power output
Total harmonic distortion
Low frequency amplifier
Power output
Total harmonic distortion
Inputs
outputs
Cassette deck section
Track format
Frequency response
Recording system
Headls
87.5 MHz to 108 MHz
13.2dBf
75 ohms (unbalanced)
530 kHzto 1710kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 pVlm
Loop antenna
10 W+ 10 W(200 Hz–20 kHz,
THD less than 1%, 8 ohms)
0.06 % (5 W, 1 kHz, 8 ohms, DIN
AUDIO)
30W+30W (50 Hz–200 Hz,THD
less than 1
?4., 4 ohms)
0.06 %(15W, 135 Hz,40hms, DIN
AUDIO)
VIDEO/AUX: 310 mV (adjustable)
PHONO: 400 mV
SPEAKERS HIGH FREQ:
accept speakersof 8 ohmsor more
SPEAKERS LOW FREQ:
accept speakersof 4 ohmsor more
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
50
HZ – 12500 Hz
AC bias
Deck 1:Recording/playback head
x 1, erase head x 1
Deck 2:Playback head x 1
Compact disc player section
Laser
Semiconductor laser (h= 780 nm)
D-A converter
1 bit dual
Signal-to-noise ratio
85 dB (1 kHz, OdB)
Harmonic distortion
0.05 % (1 kHz, OdB)
Wow and flutter
Unmeasurable
General
Powf:r requirements
120 V AC, 60
Hz
Powar consumption
100W
Dimensions of main unit
360 x 394.5x 386 mm
(W XHXD)
(14’/4 X 15’/8 X 1.5’/4 h.)
Weight of main unit
8.7 kg (19 Ibs. 3
02)
@gaker svstem SX-WZL60
Cabinet type
3 way, built-in subwoofer
Speakers
Subwoofer:
220 mm
(83/4 in.) cone type
Full range:
120 mm
(43/4 in.) cone type
Super tweeter:
20 mm
(’3/16 in.) ceramic type
Impedance
4 ohms/8 ohms
Output sound pressure level 89 dBIWlm
Dimensions (W x H x D)
290 x 444x 296 mm
(11’/2x17’/2x113/, in.)
Weight
6.5 kg (14 Ibs. 5
02)
COPYRIGHT
.’
Please check the laws on copyright relating to recordings from # ~
discs, radio or external tape for the country in which the machine : K
is being used.
#
‘*J
:::$!
NC)TE
,,’::
This equipment has been tested and found to comply with the ‘
Iimns for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
. Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
Specifications andexternalappearance aresubject to changewithout
notice.
ENGLISH 23