Filter
Top Products
OTHER CONNECTIONS
E
CD DIGITAL OUT
Iaaiaa
(OPTICAL)
&
&
VIDEO/AUX
IN
@@
6)
Sml
Refer to the operating instructions of the connected equipment
w
z
To Iplayequipment connected to VIDEO/AUX IN jacks proceed &
as follows.
for details. -
“ The connecting cords are not supplied. Obtain the necessary
7 lPress
VIDEO/AUX.
connecting cords.
“VIDEO” appears on the display.
● Consult your local Aiwa dealer for optional equipment.
2 lPlay the connected equipment.
Vli3E0/AllIX IN JACKS
To change a source name on the display
When VIDEO/AUX is pressed, “VIDEO” is displayed initially. It
This unit can input analog sound signals through these jacks.
canl be changed to “AUX” or ‘(TV.
Use a cable with RCA phono plugs to connect audio equipment
With the power on, press POWER while pressing VIDEO/AUX.
(LD players, MD players, VCRs, TV, etc.).
Repeat the procedure to select one of the names.
Connect the red plug to VIDEO/AUX IN R jack, and the white
plug to V!DEO/AUX IN L jack.
❑
CDI ~[G[TAL OUT (OPTICAL) JACK
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (DAT
deck, MD recorder, etc.).
Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug to the CD DIGITAL
OUT (OPTICAL) jack.
(’a
w
When the CD DIGITAL OUT (OPTICAL) jack is not being
usedl
Attach the supplied dust cap.
ENGLISH 21