Filter
Top Products
MULTI JOG
\
r
CD EDIT/CHECK
— ml. .
Press CD, then press A OPEN/CLOSE to open the
disc compartment. Load disc(s) with the label side
up.
To load one or two discs, place the disc(s) on the tray(s) in the
direction of the arrows as illustrated.
Tray
number
DISC CHANGE
To load three to five discs, press DISC CHANGE to rotate the
trays after placing two discs. Place the next disc on empty tray.
Each time DISC CHANGE is pressed, the trays rotate and one
disc can be placed.
After placing the discs, press AOPEN/CLOSE to close the
disc compartment.
The display shows the information of the disc to be played.
Tray number of the
disc to be played
Total playing time
Total ;umber of tracks
Load discs.
~, press E.
Play begins with the disc on tray 1.
Number of track being played
Elapsed playing time
To rXav one disc only, press one of DISC DIRECT PLAY 1-
5.
The selected disc is played once.
Selected disc tray, number Elapsed playing time
Number of track being played
To stop play, press
■ .
To pause play, press II.
To resume play, press again.
To search for a particular point during playback, keep +
or - pressed and release the button at the desired point.
To skip to the beginning of a track during playback, turn
MULTI JOG or press + or > repeatedly.
To remove discs, press AOPEN/CLOSE.
~
discs that face you. When the disc(s)
to be removed does(do) not face you, press DISC CHANGE
repeatedly.
To start play when the power is off (Direct Play Function)
Press CD. The power is turned on and play of the loaded disc(s)
begins.
When AOPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened.
To check the remaining time
During play, press CD EDIT/CHECK on the remote control while
pressing SHIFT. The amount of time remaining until all tracks
finish playing is displayed. To restore the playing time display,
repeat the above.
Selecting a track with the remote control
1
Press one of DISC DIRECT PLAY 1-5 to select a disc.
To select disc 4 or 5, press DISC DIRECT PLAY 4 or 5 while
pressing SHIFT.
2 Press numbered buttons O-9and +1O
to select a track.
Example:
To select the 25th track, press +1O, +1Oand 5.
To select the 10th track, press +10 and O.
The selected track starts to play and continues to the end of
that
disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1 Press
DISC CHANGE.
Two discs can be replaced.
2 Remove the discs and replace with other discs.
To replace the other two discs, press DISC CHANGE again.
3 Press AOPEN/CLOSE to close the disc compartment.
12 ENGL/SH