Aiwa Z-L31 Stereo System User Manual


 
MULTI JOG
\
.—
I !,–-’1
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
7 Press TUNER/BAND to select a band, and press
- DOWN or -UP to select a station.
2 Press 1I SET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station.
Frequency
Preset number
3 Repeat steps 1 and 2.
No more stations will be stored if a total of 32 preset stations
have already been stored.
“FULL” is displayed if you attempt to store more than 32 preset
stat ions.
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1 Press BAND while pressing SHIFT to select a
band.
2 Press numbered buttons O-9 and +1O to select a
preset number.
Example:
To select preset number 20, press +10, +10
and O.
To select preset number
15, press +10 and 5.
Selecting a preset number on the main unit
Press TUNER/BAND to select a band. Press TUNER PRESET
repeatedly until the preset number flashes (preset tuning mode),
and turn MULTI JOG. The preset numbers are selected
in
sequence as you turn MULTI JOG.
>P13ESET is also available to select the preset number. Each
time the button is pressed, the next highest number is selected.
To clear a preset station
Select the preset number of the station to be cleared with the
numbered buttons. Then, press
CLEAR, and press 1I SET
within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
i,~ ‘... --.----2
(Deck 1)
(Deck 2)
Usable tapes
Use Type I (normal) tapes only.
1
2
PressTAPE, then press WA to open the cassette
holder.
/A
...
..””..... .=. @
Insert a tape with the exposed side down. Push the cassette
holder to close.
Press - to start Dlaw
Only the side facing o..df;om the unit can be played back.
To stop play, press W=.
To pause play, press 1I. To resume play, press again.
To fast forward or rewind, press + or - in stop mode.
Then press WA to stop the tape.
When both Deck 1 and Deck 2 are set in the playback
mode
Deck 2 is heard.