Filter
Top Products
DISC DIRECT PLAY
-0-9,+1 o
-----
.- .-. _
‘f
~iu ( -J,
‘“”EW-l
T---=”ll
3.7 , :- L--
Irr the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
ths tape as the tracks are programmed.
EEXEI
The prqrammed edit recording will not start from a point halfway
in the tape. The tape must be recorded on from the beginning of
either side,
7
2
3
4
5
Insert the
tape into deck 2, and press DOLBY NR
tc~turn Dolby NR on or off.
Insert the tape with the side to be recorded on first facing out
from the unit.
Press CD and load
the disc(s).
Press CD EDIT/CHECK twice.
“EDl”~ and “PRGM” are displayed.
. when “AI” is displayed, press CD EDIT/CHECK again.
Press numbered buttons on the remote control
tc} designate the tape length.
10to 99 minutes can be specified.
● The +, W or MULTI JOG are also available to designate
the tape Iengtll,
Tape length Tape side A (front side)
Maximum recording
time for side A
Press
DISC DIRECT PLAY 1-3 to select a disc.
TIhelri,
press numbered buttons O-9 and + II O on
the
remote control to program a track.
Example: To select the 10th track of disc 2, press DISC
DIIRECT PLAY 2, then press +10 and O.
Remaining time Programmed
on side A
tracks
6
7
8
Repeat step 5 for the rest of the tracks for side A.
@
A track whose playing time is longer than the remaining time ,,;~’”
Press CD EDIT/CHECK to select side B and
@
program the tracks for side B.
,g’y
“g’{
After confirming “B” on the display, repeat step 5.
Tape side !3 (reverse side)
I
Press the O FIEC/REC MUTE button to start
recording,
The tape is rewound to the beginning of the front side, the
lead segment is played through for 10 seconds, and recording
starts. When recording on the front side (A) ends, recording
on the back side (B) starts.
To stop recording
Press
■ . Recording and CD play stop simultaneously.
To
check the order of the programmed track numbers
Before recording, press CD EDIT/CHECK to select side A or B,
and press + or - repeatedly.
Disc number
Tape side
Program number
Track number
Programmed track
numbers
To change the program of each side
Press CD EDIT/CHECK to select side A or B, and press
■
CLEAR to clear the program on the selected side. Then program
tracks again.
To clear the edit program
Press
■ CLEAR twice so that “EDIT” disappears on the display.
m
Recording is inhibited if the erasure prevention tab on either side
of the tape is broken off.
ENGL/SH
20