Aiwa NSX-A909 Stereo System User Manual


 
DISC CHANGE
1 ‘;%:;,,!,$!!
DISC DIRECT PLAYI 1-3
II
11 11
1
I
Bl
1
—’:.4
LOADING DISCS
Press CD, then press 4 OPEN/CLOSE to open the
disc compartment. Load disc(s) with the label side
up.
To dav one or two discs, place the discs on tray 1 and 2.
To Wav three discs, press DISC CHANGE to rotate the trays
after placing two discs. Place the third disc on tray 3.
Close the disc compatlment by pressing A OPEN/CLOSE.
Tray 1
CHANGE
Tray number of the
disc to be played Total playing time
Total number of tracks
Load discs,
To olav all discs in the disc com~artment, press +-.
Play begins with the disc on tray 1.
Number of track being played
Elapsed playing time
To
Dlav one disc only. press DISC DIRECT PLAY 1-3.
The selected disc is played once.
To play with the remote control
Press DISC DIRECT PLAY, then press numbered buttons 1-3
within 3 seconds to select a disc.
To
stop play, press W.
To
pause play, press II. To resume play, press again.
To
search for a particular point during playback, keep +
or - pressed and release it at the desired point.
To
skip to the beginning of a track during playback, press
- or * repeatedly or turn MULTI JOG.
To
remove discs, press 4 OPEN/CLOSE.
To start play when the power is off (Direct Play Function)
Press CD. The power is turned on and play of the loaded disc(s)
begins.
When 4 OPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened.
To
check the remaining time
During
play, press CD EDIT/CHECK. The amount of time
remaining until all tracks finish playing is displayed. To restore
the playing time display, repeat the above.
Selecting a track with the remote control
1
2
Press DISC DIRECT PLAY, then press numbered buttons
1-3 within 3 seconds to select a disc,
Press numbered buttons O-9 and +1 Oto select a track.
Example:
To select the 25th track, press +1 O, +1 O and 5.
To select the 10th track, press +10 and O.
The selected track starts to play and continues to the end of
that disc.
Replacing
discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1 Press DISC CHANGE.
2 Remove the discs and replace with other discs.
3 Press 4 OPEN/CLOSE to close the disc compartment.
m
c
When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
Do not place more than one compact disc on one disc tray.
Do not”tilt the unit with discs loaded. Doing
malfunctions.
Do not use irregular shape CDs (example:
octagonal ones). It may result in malfunctions.
so may cause
heart-shaped,
15 ENGLISH