Filter
Top Products
This section explains how to record from the tuner, CD player, or
external equipment.
4
5
Deck 2
Preparation
“
Use Type I (normal) and Type II (high/CrOz) tapes for recording.
● Set the tape to the point where recording will start.
1
2
3
4
5
Insert the tape to be recorded on into deck 2.
Insert the tape with the side to be recorded on first facing out
from the unit.
A EJECT
Press REV MODE to select the reverse mode.
To record on one side only, select Z.
To record on both sides, select => or (1).
Press DOLBY NR to turn Dolby NR on or off.
To record with DOLBY NR, turn on DO NR.
To record without DOLBY NR, turn off 00 NR.
Press function (CD, TUNER, VIDEO/AUX or MD)
and prepare the source to be recorded.
To recordfrom a
CD, press CD and load the disc(s).
To record from a radio broadcast, press TUNER and tune
in to a station.
To record from a connected source, press VIDEO/AUX or
MD.
Press ● REC/REC MUTE to start recording.
When the selected function is CD, playback and recording
start simultaneously,
To stop recording, press W.
To pause recording, press II. (Applicable when the source is
TUNER, VIDEO/AUX or MD) To resume recording, press it again.
Sound adjustment during recording
The output volume and tone (except BBE and Rhythm play
function) of the speakers or headphones may be freely varied
without affecting of the recording.
@2a8P8m.B.Q3m?&a8$mBsmB@P.e~@a~=GEwazm:*asm*v@MR#c*m88lE4bma8Bs3Ts$%$mE8M=Es%$aa~as3*Ew.%@
INSERTING BLANK SPACES
Insertion of 4-second blank spaces enables you to activate the
Music Sensor function. (Applicable when the source is TUNER,
VIDEO/AUX or MD.)
1 Press
● REC/REC MUTE during recording or while in
recording pause mode.
~
on the display flashes for 4 seconds and the tape runs
without recording, After 4 seconds, the deck enters the
recording pause mode.
2
Press II to resume recording.
To insert a blank space of less than 4 seconds,
press .
REC/REC MUTE again while ~ is flashing.
To insert blank soaces of more than 4 seconds, after the deck
enters recording pause mode, press
● REC/REC MUTE again.
Each time the button is pressed, a 4-second blank space is
added.
To erase a recording
Make sure the microphone is not connected to this unit and the
Rhythm play function (page 7) is canceled.
1
2
3
4
Insert the tape to be erased into deck 2 and press
TAPE/
DECK 1/2 to display “TP 2“.
Set the tape to the pointwhere the erasure isto be started.
Set the reverse mode by pressing REV MODE.
Press c REC/REC MUTE to start the erasure.
17 ENGLISH