Filter
Top Products
PRESETTING STATIONS
Numbered
buttons
TUNER
BAND
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1
2
3
Press the TUNER button to select the band, and
press the
UPA or DOWN7 button to select a
station. Direct tuning is also available.
Press the SET button to store the station.
A preset number assigned to the station, beginning from 1 in
consecutive order for each band, flashes in the display for
two seconds.
Repeat steps 1 and 2.
No “more stati&s will be stored if a total of 32 stations have
already been stored for all the bands.
m
PRESET NUMBER TUNING
1 Press the TUNER button to select a band.
2 Press the nulmbered buttons to select a preset
number.
Example:
To select preset number 25, press 2 and 5.
To select preset number 7, press O and 7.
To clear a preset station
Select the preset nllmber of the station to be cleared Then, press
the SET button, and press the SET button again within four
seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
When using the remote control
Press the TUNER 13AND button to select a band, then press the
numbered buttons to select a preset number,
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
IHVGL/.W/II2