Filter
Top Products
BASIC OPERATIONS
INSERTING TAPES
REV MODE
TAPEI
DECK
,,
A EJECT
Deck 1~
Deck 2
● On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
● Use Type I (normal), Type II (high/CrOz) or Type IV (metal)
tapes for playback.
Press the TAPE button and press the & EJECT mark
to open the cassette holder.
Insert a tape with-the exposed side down. Push the cassette
holder to close.
To select a reverse mode (deck 2 only)
Each time the REV MODE button is pressed, the reverse mode
changes.
.
,
To play one side only, select Z.
To play from front side to reverse side once only, select 1).
To play both sides repeatedly, select <=).
● When tapes are loaded in both decks, Z) on the display
indicates Continuous Play.
.‘
PLAYING BACK A TAPE
4P
■
DIRECTION/
PRESET
II
DOLBY NR < DOWN
-
UP
Insert a tape.
1 Press the DOLBY NR button and turn Dolby NR
on or off to match the playback tape.
For tapes recorded with DOLBY NR, turn on DO NR.
For tapes recorded without DOLBY NR, turn off UU NFL
.
2
Press the,+> button to start. play. -
Playing deck number
Playback side indicator
The tape c!ounter indicates
the tape running length.
-: The front side is being played (forward). ‘
+: The back side is being played (reverse).
When tapes are loaded in both decks
Press the TAPE button first to select a deck.
The selected deck number is displayed. -
To stop play, press the
■ button.
To pause play (deck 2 only), press the II button. To resume
play, press again.
To change the playback side, press the + E DIRECTION/
PRESET button in play or pause mode.
.
To fast forward or rewind, press the - or - button. Then
press the
■ button to stop the tape.
To start play when the power is off (Direct Play Function)
>.
Press the TAPE button. The power is turned on and play of the
inserted tape begins.
To set the tape counter to 0000
Press the
■ CLEAR button in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.