Filter
Top Products
26 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide
Setting Preferences & Enabling Options Preliminary
User Preferences Preliminary
User Preferences
From the Utility menu, you can set the following user preferences:
• Display Settings, below
• Power On and Preset on page 27
• Front Panel Knob Resolution on page 28
Display Settings
NOTE With both brightness and contrast set to minimum, the display may be too dark to see the
softkeys. If this happens, use the figure above to locate the brightness and contrast softkeys
and adjust their values so that you can see the display.
Range:15 to 100
Range: 35 to 55
Range: 1to 12 hours, in 1 hour increments
Light Only: turns the display light off, leaving the text visible at a low intensity.
Light & Text: turns the display light and the text off.
If the display remains unchanged for long periods of time, use this mode to
prevent the text from burning the display.
When on, commands executed through
the remote control bus update the signal
generator display accordingly.
Bright without color
Utility > Display
See also, Using the Secure Display (Option 006 Only) on page
For details on each key, use key help
as described on page 42.
page 304
Dark text on a light
background.
Light text on a dark
background.