Filter
Top Products
Ge t t I n G St a r t e d
7
On/Off switch
(right
headphone,
bottom)
Link
buttons
3. Switch on the audio source (TV, DVD, CD player, etc.) the
transmitter is connected to. If your audio source is a DVD or CD
player, start a disc. The On indicator on the transmitter’s front
panel turns green and blinks rapidly, indicating that the transmitter
is trying to link with the headphones.
The headphones and transmitter should link automatically in a
matter of seconds—the transmitter’s On light and the headphone’s
indicator both turn solid green when linked.
Using the Wireless Headphones
Turning the Headphones On
1. Make sure the transmitter is
plugged in and connected to an
audio source.
2. Put the On/Off switch on the
right headphone in the On
position. The indicator on the
right headphone lights up green
and blinks slowly to show that
the headphones are on.
Indicator
(right headphone,
side)
If the transmitter and headphones
do NOT link automatically: Press and
hold the Link button on the back of
the transmitter for ve seconds. Then
press and hold the Link button on the
right headphone for 5 seconds. The
headphones and transmitter lock onto
each other for wireless transmission.
The LED on the headphones ashes
while the devices are tuning; it stays
on once the devices are tuned.
4. If you’re using a variable-level audio output (something you can
set the volume on), adjust the volume on your audio source. Then
adjust the volume using the Volume wheel on the right earphone.