Filter
Top Products
Ge t t I n G St a r t e d
6
1. Connect a USB cable (not
included) to an available USB
port on your computer.
2. Connect the other end of the
USB cable to the transmitter’s
USB Power In jack.
3. Set the ANALOG/USB switch on
the transmitter’s back panel to
USB.
Transmitter
(back panel)
To connect to your computer’s USB port:
IMPORTANT: If you’re using this USB connection to your computer,
do not connect the built-in 3.5mm audio cable to your computer.
This USB connection to your computer sends power and audio to
the transmitter, so you don’t need to make any other transmitter
connections.
1
2
3