E-56
Continuous power output (20Hz—20kHz at 0.05% THD), per channel
(AVR600 only)
2 channels driven 150W
All channels driven 120W
THD at full rated power <0.2%
Residual noise & hum <0.25mV unweighted 20Hz – 22kHz
Inputs
Phono input:
Input sensitivity at 1kHz 5mV
Input impedance 47kΩ
Signal/noise ratio (CCIR, 65W) 88dB
Overload margin 31dB
Line inputs:
Nominal sensitivity 500mV–4V (user adjustable)
Input impedance 47kΩ
Signal/noise ratio (CCIR, 65W) 100dB
Preamplier outputs
Max output level 6V RMS
Output impedance <50Ω
THD+N (20Hz—20kHz) -100dB
Video inputs
Component video signal/noise 85dB
Composite video signal/noise 70dB
Headphone output
Maximum output level into 600Ω 4V p-p
Output impedance <5Ω
Continual improvement policy
Arcam has a policy of continual improvement for its
products. is means that designs and specications
are subject to change without notice.
specifications
General
Mains voltage 110–120V or 220–240V
Power consumption (maximum)
AVR600 1.5kVA (ermal dissipation approx.
2300 BTU/hour)
AV888 120VA (ermal dissipation approx.
410BTU/hour)
Power consumption (idle, typical) 120VA (ermal dissipation approx.
410 BTU/hour)
Power consumption (standby) 3 VA
Dimensions W x D x H (including feet) 432 x 450 x 180mm
Weight (net)
AVR600 25.0kg
AV888 12.0kg
Weight (packed)
AVR600 28.0kg
AV888 17.0kg
Supplied accessories Mains lead
CR102 remote control
4 x AAA batteries
Manual
HDMI lead support bar
DAB aerial (if DAB module tted)
FM aerial (if AM/FM tted)
AM loop aerial (if AM/FM tted)
Calibration microphone
E&OE
NOTE: All specication values are typical unless otherwise stated.