E-47
English
XLR balanced line outputs –
AV888 only
e AV888 processor provides XLR connectors for each
of seven channels, to an XLR-equipped amplier (e.g.
the Arcam P777). ree XLR subwoofer outputs are
provided in addition.
RIGHT, LEFT, CENTRE
Connect these to the equivalent (Right, Le and Centre)
front channels of your power amplier.
SW1
Main subwoofer output. Connect this to the input of
your active subwoofer, if present.
SW2, SW3
Subwoofer 2 and Subwoofer 3 auxiliary outputs. ese
are equivalent to SW1 but they allow the use of multiple
subwoofers.
SR, SL
Surround Right and Surround Le outputs. Connect
these to the Surround Right and Le power amplier
inputs.
SBR, SBL
Surround Back Right and Surround Back Le outputs
(only used in 6.1 and 7.1 channel systems). Connect
these to the Surround Back Right and Surround Back
Le power amplier inputs.
For 6.1 channel speaker congurations, connect the
single Surround Back power amplier to the SBL output.
external
amplifiers
Analogue pre-amplifier outputs
All pre-amplier analogue outputs are buered, have
a low output impedance and are at line level. ey are
able to drive long cables or several inputs in parallel if
required.
R, L, C
Connect these to the equivalent
(Right, Le and Centre) front
channels of your power amplier.
SW1
Main subwoofer output. Connect
this to the input of your active
subwoofer, if present.
SW2, SW3
Subwoofer 2 and Subwoofer
3 auxiliary outputs. ese are
equivalent to SW1 but they allow
the use of multiple subwoofers.
SR, SL
Surround Right and Surround Le outputs. Connect
these to the Surround Right and Le power amplier
inputs.
SBR, SBL
Surround Back Right and Surround Back Le outputs
(only used in 6.1 and 7.1 channel systems). Connect
these to the Surround Back Right and Surround Back
Le power amplier inputs.
For 6.1 channel speaker congurations, connect the
single Surround Back power amplier to the SBL output.