A SERVICE OF

logo

Surface Units and Reflector Bowls
Removing
Burn
and Electrlcal Shock Hazard
Make sure all surface units are OR before
removlng surface units and reflector bowls.
Fallure to do so can result In burns or electrlcal
1.
Turn off all surface units.
2. Lift the edge of the unit, opposite
the receptacle, just enough to
clear the element hold down clip
and the reflector bowl.
3. Pull the surface unit straight away
from the receptacle.
4. Lift out the reflector bowl. See
“Cleaning Chart” on page 24 for
cleaning instructions.