A SERVICE OF

logo

Open as PDF
next previous
SURFACE UNIT CONTROLS
Unl
II you get used to the settings, use the following as a gulde.
Control knobs must
be pushed In before
turning them to a set-
ting. They can be set
anywhere between HI
and OFF.
PUSH IN.
Turn to setting.
YE0
Use HI to start
foods cooking or
to bring liquids
to a boil. Surroce
unit will not fur n
red if good con-
locf fs mode with
bottom of pan.
Urn
Use MED-HI to
hold a rapid boil
or to fry chicken
or pancakes.
rio
Use MED for
gravy, puddings
and icings or to
cook large
amounts of
vegetables.
The slgnal light will
glow when a surface
unlt Is on. Be sure
the light Is off when
you are not cooklng.
YE0
Use MED-LO to
keep food
cooking after
starting it on a
higher setting.
Use LO to keep
food warm until
ready to serve.
Set the heat
higher or lower
within the
LO
band to keep
food at the
temperature you
want.
COOKTOP MODULE CONTROLS
Use Surface Unit Controls to turn on cooktop modules. For the Optional Griddle only,
surface unit indicators with boxes show which control to use:
Grlddle on the Left
Grlddle on the Right
For the Grlll Module, use front or back controls as you would for surface units, Use both
controls if you want both the front and back of the grill to heat.
Grill on Left
Grill on the Rlght
Left Front
Rlght
Rear
The Optlonal Black Smoothtop Module works the same as Surface Unit Modules
10