41
PROBLEM
The Self-Cleaning cycle
will not operate
(right oven only)
Cooking results are
not what you expected
“F” followed by a
number shows on the
display
CAUSE
• The clock does not show the correct time of day. Reset
the clock to show the correct time of day. (See “Setting
the clock” on page 13.)
• The range is not level. (See Installation Instructions
supplied with your range.)
• The oven temperature seems too low or too high. See
the “Adjusting the oven temperature control” section on
pages 18-20 to adjust the oven temperature.
• You did not preheat the oven before baking (if called for
in recipe).
• You are using a pan that is not the correct type or size.
Refer to a reliable cookbook or recipe for recommended
pan type and size.
• There is not enough air space around pan when baking.
Allow 1
1
⁄2 to 2 inches (3.75 cm to 5 cm) of air space on all
sides of pan.
• The cookware is too large or too small for the coil element
being used. The pan should be the same size or slightly
larger than the coil element being used.
• Press OFF/CANCEL. If the code reappears, note the code
and call for service. (See Step 2 in the “Requesting
Assistance or Service” section on page 42.)
If none of these items was causing your problem, see the “Requesting Assistance or
Service” section on page 42.
TROUBLESHOOTING
4372849Av06c64 1/29/99 5:08 PM Page 41
