14
PRESS YOU SEE
Display shows time of day.
14
2. Set time.
Press the “up” (s) or “down” (t) pad(s)
until the correct time shows on the
display.
NOTES:
• Press the “up” (s) pad to increase the
time by 1 minute, or the “down” (t)
pad to decrease the time by 1 minute.
• Press and hold the “up” (s) pad to
increase the time by 10 minutes, or
press and hold the “down” (t) pad to
decrease the time by 10 minutes.
• If you press the “down” (t) pad
first, the timer will show 11 hours and
59 minutes.
The Minute Timer will begin counting
down immediately.
NOTES:
• To view other functions while using the
Minute Timer, press the command pad
for that function.
• When changing the Minute Timer while
time is counting down, the display will
show only minutes. The display will
show seconds once the countdown
time goes below 1 minute.
When the time is up:
You will hear three tones, then three
reminder tones every minute until you
press TIMER SET.
To cancel the Minute Timer:
Press TIMER SET.
PRESS YOU SEE
YOU SEE
USING YOUR RANGE
Display shows set time.
Display shows time
counting down.
4372849Av06c64 1/29/99 5:05 PM Page 14
