![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/8/16/8168dcd4-1980-42bf-8ba1-83d992841fae/8168dcd4-1980-42bf-8ba1-83d992841fae-bg24.png)
Coil elements and reflector bowls
Removing
1. Make sure all coil elements are off and
cool before removing the coil elements,
reflector bowls, and trim rings.
2. Lift the edge of the coil element, opposite
the receptacle, just enough to clear the
reflector bowl and trim ring.
3. Pull the coil element straight away from
the receptacle.
4. Lift out the reflector bowl and trim ring.
See “Cleaning chart” in this section for
cleaning instructions.
Replacing
1. Make sure all coil elements are off and
cool before replacing the coil elements,
reflector bowls, and trim rings.
36
OFF
36
CARING FOR YOUR RANGE
4372849Av06c64 1/29/99 5:07 PM Page 36