A SERVICE OF

logo

4.
5.
If a cleaning cycle other than 3 hours is desired,
use the Hour and Minute pad to set the desired
cleaning time. Push the “up” (A) or udown” (r)
pad(s) until a time between 2-4 shows in the
display.
l
Use 2 hours for light soil.
l
Use 34 hours for moderate to heavy soil.
Push the StarVEnter pad. The Clean Time
Indicator Light will stay on to show that the oven
is programmed for the Setf-Cleaning cycle.
Skip to Step 6 if you want the SelfCleaning
cycle to start now.
To delay the start using Stop Time:
Set both the Oven Selector and Oven Tem-
perature Control Knob to CLEAN. Push the
Stop Time pad. The Clean Time Indicator Light
will flash and the Stop Time
indicator Light will
light up. Use the Hour and Minute pad to set
the desired stop time. Push the “LIP” (A) or
“down” (r) pad(s) until the correct time shows
in the display. The oven will automatically
compute the delay start time by subtracting the
set cleaning time from the set stop time.
i-
Push the Start/Enter pad. The display will go
back to showing the current time of day. The
Delay indicator tight will light up and the
Clean Time and Stop Time indicator Lights will
flash to indicate that the oven is programmed
to start the Setf-Cleaning cycle at a later time.
When the start time is reached, the Delay
Indicator Light will go off, the Clean Time
Indicator Light will light up (stop flashing) and
the oven will start to clean.
To delay the start using Start Time:
Set both the Oven Selector
and Oven Tem-
perature Control Knob to CLEAN. Push the
Delay Start Time pad. The Clean Time
Indicator Light will flash and the Start Time
indicator Light will light up. Use the Hour and
Minute pads to set the desired start time. Push
the “up” (A) or “down” (r) pad(s) until the
correct time shows in the d/splay.
Push the Statinter pad. The display will
go back to showing the current time of day.
The Delay Indicator Light will light up and the
Clean Time and Start Time Indicator Lights will
flash to indicate that the oven is programmed
to start the Self-Cleaning cycle at a later time.
When the start time is reached, the Delay
Indicator Light will go off, the Clean Time
Indicator Light will light up (stop flashing) and
the oven will start to clean.
DELAY
30