Method Z-Using Start Time
and Stop Time:
1.
2
3.
4.
5.
6.
7.
Position the oven rack(s) properfy and put
food in the oven.
Make
l
ure the clock fa ret to the correct
time of day. (See “Setting the clccK on
paw
12.1
Set the Oven Selector to TIME BAKE.
Set the Oven Temperature Control Knob to
the desired temperature.
Push the Delay Start Time pad. The time of
day with the colon flashing will show in the
display and the Start Time Indicator Light will
light up.
Use the Hour and Minute pads to set the
desired start time. Push the “up’ (A) or
“down” (r) pad(s) until the correct time shows
in the display.
This example shows a desired start time of
2 o’clock
Push the Stop Time pad. The time of day with
the colon flashing will show in the display, the
Stop Time Indicator LigM will light up, and the
Start Time Indicator LigM will flash.
_ 8. Use the Hour and Minute pads to set the
desired stop time. Push the “up”
(A)
or
edown” (r) pad(s) until the correct time shows
in the display.
This example shows a desired stop time of
2:30. This provides
a
cook time of 30 minutes
(the difference between the start and stop
times).
NOTE:
If you do not set a stop time within
5 minutes, the display will return to the time
of day.
22
START STOP
TIME TIME
