Using your range
Using the Surface Units
PUSH IN
AND TURN
Control knobs must be pushed in
before turning
them to a setting. They
can be set anywhere between HI
and OFF.
Surface Unit Markers
The solid dot in the surface unit
marker shows which surface unit
is turned on by that knob.
Surface Unit
Indicator lights
One of the surface unit indicator
lights on the control panel will glow
when a surface unit is on.
Burn and Flre Hazard
Be sure all control knobs are
turned to OFF and all lndlcator
llghts are OFF when you are not
cooklng. Someone could be
burned or a fire could start if
a surface unlt Is accidentally
left ON.
Until you get used to the settings, use the following as a guide.
For best results,
start cooking at the high settings; then turn the control knob down to continue
cooking.
Use HI
to start
Use MED-HI Use MED
Use MED-LO Use LO
to
foods cook-
to hold a
for gravy,
to keep food keep food
ing; to bring
rapid boil; to
puddings
cooking after warm until
liquids to a
fry chicken
and icing; to
starting it
ready to
boil.
or pancakes.
cook large
on a higher
serve. Set the
amounts of
setting.
heat higher
vegetables.
or lower
within the LO
band to keep
food at the
temperature
you want.
