WINDING THE BOBBIN -1
The needle and take-up lever moves up and down while
winding the bobbin.
Keep ngers away from all moving parts. Special care is
required around the machine needle.
To avoid possible injury, do not touch any moving parts.
Your sewing machine works by stiching two threads. The main thread is
contained on the spool of thread which is placed at the top of the machine.
A second thread is contained in a compartment under the machine. This
thread is wound onto a “bobbin” from the main spool.
A: Place the spool of thread on the Spool Pin.
1: Pull out the spool pin stored in the back of the sewing machine.
2: Prepare the spool. The thread should protrude from the spool.
3: Place the spool of thread on the spool pin.
B: Remove the Bobbin.
1: Slide the hook cover plate toward you and remove it.
2: Lift the bobbin out of the bobbin holder.
3: Place the spool of thread on the spool pin.
Page 7
A
B1A
B2
