A SERVICE OF

logo

Open as PDF
next previous
BRINGING UP THE BOBBIN THREAD
Refer to Figure 1
1: Raise the presser foot. Hold the needle thread lightly with your left hand and
rotate the handwheel counterclockwise, toward you, for one complete turn.
Hold the upper thread LOOSELY with the left hand.
Turn the handwheel forwards to lower and then fully raise the needle.
Refer to Figure 2
The upper thread will catch and raise the lower thread.
1: Pull on the upper thread to bring the lower thread up through the stitch plate
hole.
2: Pull the lower thread up fully .
Refer to Figure 3
Pull both threads 4” to 6” (10 to 15 cm) under and behind the presser foot.
The sewing machine is now ready for use.
Page 11
Figure 1
Figure 2
Figure 3