Wash And Rinse Water Temperatures Are Incorrect
•
The hot water hose and cold water hose are connected
Is Entering Washer But Tub Does Not Fill
•
Standpipe for the drain hose is not the correct height.
(Fig. 2), drain hose is to far into standpipe or air break
•
Hose connections at faucet and/or machi
•
Rubber washers are not inside the metal hose conne
•
Drain hose not securely fastened (Fig. 1,2). Drain pipes
in the house are clogged.
•
Too much detergent or a high
sudsing detergent in soft
•
Soil may be on the door seal or gasket of the washer
Water In Washer Does Not Drain Or Drains Slowly
•
Drain hose is kinked or clogged (Fig. 1).
•
does not have a large enough diameter and is
slowing the draining process.
•
•
•
•
Detergent used is not compatible with water conditions.
•
Garments were pretreated, befor
•
Additional laundry aids such as oxygen bleach may
cause additional sudsing.
•
chugging" noise is normal in a
Rattling And Clanking Noise
•
Foreign objects such as coins or safety pins may
•
Foreign objects may be in the pump.
•
Belt buckles and metal fasteners are hitting the washer
tub during the washing cycle.
•
Washer is not level and lock nuts may not be securely
tightened on front adjusting feet.
•
A rubber cap may be missing from one of the leveling
•
Washer may not be installed on
•
The four shipping brackets are still on the machine.
•
Heavy wash loads may produce a thumpi
beginning of the spin cycle.
