Recording/Playback
27
Zooming
You can zoom in up to the magnications
shown in the following table.
(optical zoom)
DCR-SR45/SR46 40 ×
DCR-SR65/SR85 25 ×
You can adjust the magnication with the
power zoom lever or the zoom buttons on
the LCD frame.
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
Notes
[STEADYSHOT] may not reduce image
blurring as desired when the power zoom lever
is set to the T (Telephoto) side.
Be sure to keep your nger on the power zoom
lever. If you move your nger o the power
zoom lever, the operation sound of the lever
may also be recorded.
You cannot change the zoom speed with the
zoom buttons on the LCD frame.
e minimum possible distance between
camcorder and subject while maintaining sharp
focus is about 1 cm (about 13/32 in.) for wide
angle and about 80 cm (about 2 5/8 feet) for
telephoto.
Tips
Using [DIGITAL ZOOM] (p. 58) lets you zoom
in further than the magnication shown in the
table.
Starting shooting quickly (QUICK ON)
When you press QUICK ON, the
camcorder goes to sleep mode (power
saving mode) instead of turning o.
e QUICK ON lamp keeps ashing
during sleep mode. Press QUICK ON
again to start recording next time. Your
camcorder returns to recording standby in
approximately 1 second.
Tips
During sleep mode, the battery is consumed at
about half that of usual recording, enabling you
to save battery power.
e power turns o automatically if you do
not operate your camcorder for a certain
period during sleep mode. You can set the time
that you want the camcorder to remain on
before automatically turning o in sleep mode
([QUICK ON STBY], (p.
67)).
Wider range of view:
(Wide angle)
Close view: (Telephoto)
