DUBBING A TAPE MANUALLY DUBBING THE WHOLE TAPE
1,4
❑
2
3
.+-
J -1,
●
.—
.
2
5
13ma
● Set the tape to the point where recording will start.
● The reverse mode is automatically set to 1.
Note that recording will be done on one side of the tape only.
1
2
3
4
5
Press the TAPE button.
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert the tapes with the sides to be played back or recorded
on facing out from the unit,
Press the DOLBY NR button to turn off the Dolby
NR.
00
NR on the display goes out.
Press the TAPE/DECK 1/2 button to select
deck 1.
“TP 1” is displayed.
Press the ● REC/REC MUTE button to start
recording.
Playing and recording start simultaneously.
To stop dubbing
Press the Ml button.
To set the Dolby NR when playing back the dubbed tape
Press the DOLBY NR button and turn Dolby NR on or off to
match the original tape.
This function allows you to make exact copies of both sic~es cl
the original tape, The reverse side of both tapes will start
simultaneously as soon as the longer tape has been reversed.
● Dubbing does not start from a point halfway in the tape.
● The reverse mode is automatically set to 1),
● The Dolby NR does not affect recording,
1
2
3
Press the TAPE button.
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded
on first facing out from the unit.
m
Press the SYNC DUB button once or twice to start
recording.
@
For recording at normal speed, press it once to display
NORM-DUB.
@ For
recording at high speed, press it twice to display
HIGH-DUB,
The tapes are rewound to the beginning of the front sides,
and recording starts.
To
stop dubbinq
Press the ■ butt&.
To set the Dolby NR when playing back the dubbedl tape
Press the DOLBY NR button and turn Dolby NR on or off to
match the original tape.
m
Recording does not start, if the erasure prevention tab on either
side of the tape is broken off.
HVGL/SIY
14
