41
DCR-PC7E 3-858-632-12E (E32)
Advanced operations
You can search the beginning of the recorded picture with the date using the Remote
Commander. You can also search the photo-recorded pictures only in the backward and
forward direction from the preset position.
(1) Make sure that the POWER switch is set to VTR.
(2) Press SEARCH MODE on the Remote Commander to select date search (search
with the date) or photo search (search the photo-recorded pictures only).
(3) Press + for upward or = for downward on the Remote Commander to
select the desired picture.
Each time you press + or =, the camcorder searches for the next scene.
To stop searching
Press p STOP.
When you use a recorded tape which has blank portions between pictures
The camcorder may not search for the recorded picture or data may not be stored.
Note on cassette memory
The cassette memory function cannot be used with this camcorder.
Notes on searching
• The camcorder may not search if the beginning of the search portion is too close to
the tape head position.
• When you use date search, the camcorder plays back the search picture, and when
you use photo search, the camcorder enters playback pause at the point.
Locating the beginning of each scene
1
VTR
POWER
OFF
CAMERA
PHOTO
SEARCH
MODE
2
3
