28
DCR-PC7E 3-858-632-12E (E32)
Photo recording
You can record a still picture like a photograph for about seven seconds. This mode is
useful when you want to enjoy a picture such as a photograph or when you print a
picture using a video printer (not supplied). You can record about 510 pictures on a 60-
minute tape.
Shutter speed is automatically adjusted up to 1/1000 depending on the exposure.
(1) While pressing the small green button on the POWER switch, set it to PHOTO.
(2) Keep pressing START/STOP lightly until a still picture and “PHOTO
CAPTURE” appear on the LCD screen or in the viewfinder.
Recording does not start yet. To change the still picture, release START/STOP,
select still picture again, and keep pressing START/STOP lightly again.
If you press the PHOTO button on the Remote Commander when a still
picture appears on the LCD screen or in the viewfinder, the camcorder will
record that still picture. However, you cannot select other still pictures by
using this button.
(3) Press START/STOP deeper.
“PHOTO REC” flashes and the still picture on the LCD screen or in the
viewfinder is recorded for about seven seconds. The sound during those seven
seconds is also recorded and the pictures appear like an animation on the LCD
screen or in the viewfinder. You cannot change the POWER switch or press
START/STOP during recording.
Note on the still picture
When the still picture recorded on this camocorder is played back on the other VCR, the
picture may be blurred. This is not malfunction.
VTR
POWER
OFF
CAMERA
PHOTO
1,2,3
