A SERVICE OF

logo

Open as PDF
next previous
Dialin Setup
58
Remote User Configuration
Remote users can dialin using the CyberGuard SG appliance using the standard
Windows Dial-Up Networking software. Set up a new dial-out connection on the remote
PC to dial the phone number of the modem connected to the CyberGuard SG appliance
COM port. After the dialin is connected, users can access all network resources as if
they were a local user.
Windows 95/98/Me:
From the Dial-Up Networking folder, double-click Make New Connection and enter the
Connection Name for your new dialin connection.
Select the modem to use from the Select a device pull down menu.
Click Next and enter the phone number of the modem connected to the CyberGuard SG
appliance.
Click Finish.
An icon is displayed in Dial-Up Networking with your Connection Name. Right click the
icon once, and then click File and Properties and click the Server Types tab as shown
in the following figure:
Figure 4-4