47
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
Adjustment settings
Option
MENU
Input Select
INPUT1 [AUTO]
AV-Y/C
AUTO
COMPONENT
Option
MENU
Input Select
INPUT3 [AUTO]
AV-Y/C
RGB
AUTO
COMPONENT
INPUT 1 signal menu
INPUT 3 signal menu
Input selection
Can use for selecting the input source.
1 Press INPUT on the remote control unit or on the
Display.
• INPUT SOURCE menu displays.
2 Hold down INPUT on the remote control unit or
on the Display to select the input source.
• An image from the selected source automatically
displays.
• You can also select the input source by pressing
a/b.
A
• Items grayed out are not selectable.
Input signal source
Input signal setting
For setting the signal type of external equipment.
1 Press MENU.
2 Press a/b to select “Option”, and then press SET/
ENTER.
3 Press a/b to select “Input Select”, and then press
SET/ENTER.
4 Press a/b to select an input source you want to
set, and then press SET/ENTER.
5 Press a/b to select a signal type, and then press
SET/ENTER.
• If the selected signal type is incorrect, an image does
not display or no color image displays.
6 Press MENU to exit the menu.
A
• Return to the previous menu by pressing MENU RETURN.
• The System automatically sets input signals from
“INPUT2”,“INPUT4” and “PC”.
• If no image displays, try to change the signal type.
• Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 3 signal selection to
“AUTO” when other equipment is connected will result
in the following connectivity priority.
RECEIVER
POWER
INPUT
TV
ANT-A/B
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VOL CH
MUTE
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
VOL
INFO
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
INPUT 1
1. COMPONENT VIDEO
2. S-VIDEO
3. VIDEO
INPUT 3
1. COMPONENT VIDEO
2. S-VIDEO
3. VIDEO
4. HD (RGB) INPUT
