Sharp PN-V600A Manual

next previous

Mounting Precautions (For SHARP dealers and service engineers)

• Wheninstalling,removingormovingthemonitor,ensurethatthisiscarriedoutbyatleast2people.

• Besuretouseawall-mountbracketdesignedordesignatedformountingthemonitor.

• Thismonitorisdesignedtobeinstalledonaconcretewallorpillar.Reinforcedworkmightbenecessaryforsomematerials

such as plaster / thin plastic board / wood before starting installation.

This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.

Install by the most suitable method for the material and the structure.

• ToattachaVESA-compliantmountingbracket,useM6screwsthatare5/16inch(8mm)to3/8inch(10mm)longerthanthe

thickness of the mounting bracket.

• Whenmovingthemonitor,besuretoholditwitheitherhandlesorthecornersonthebottomoftheunit.DonotholdtheLCD

panel.Thismaycauseproductdamage,failure,orinjury.

• Whenperforminganinstallationwherethemonitorisstacked,pleaseinstallitsuchthatloadisnotplacedonthemonitor

frame.

• Aftermounting,pleasecarefullyensurethemonitorissecure,andnotabletocomeloosefromthewallormount.

• DonotuseanyscrewholesotherthanVESAholesforinstallation.