Sharp PN-V600A Manual

A SERVICE OF

next previous

16

E

Binding Cables

The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamps.

Insert the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables.

: Cable clamp attachment

Cable clamp

Cable

Cable clamp

attachment

Removing the Handles

The handles can be removed.

The removed handles can be attached on the side.

1.Removethehandlescrewsandremovethehandlesand

handle spacers.

2. Pass the handle screws through the handles and handle

spacers in order and secure.

Caution

• Thehandles,handlescrewsandhandlespacersarefor

thismonitor.Donotusethemforanyotherdevices.

• Whenattachingthehandles,alwaysusethismonitor’s

handles, handle spacers, and handle screws.

• Besurethehandlesareattachedsecurely.

TIPS

• Tolowertheheightofthehandles,attachthehandleswith

the handle spacers removed. To attach the handles with

the handle spacers removed, secure the handles with the

included handle screws (short).

Handle

Handle screws

Handle spacers

Handle spacers

Afxing the Protection Covers

Afterinstallingthemonitor,afxtheprotectioncovers

(4 pieces) as necessary.

Protection cover

Protection cover