A SERVICE OF

logo

Open as PDF
next previous
E
24
USER
AdjustseachitemwhentheWHITEBALANCEissetto
USER.
R-CONTRAST ....Adjustsbright-tonedredcomponent.
G-CONTRAST ....Adjustsbright-tonedgreencomponent.
B-CONTRAST ....Adjustsbright-tonedbluecomponent.
R-OFFSET ..........Adjustsdark-tonedredcomponent.
G-OFFSET .........Adjustsdark-tonedgreencomponent.
B-OFFSET ..........Adjustsdark-tonedbluecomponent.
COPY TO USER
CopiesthevaluesetforPRESETtotheUSERsetting.
Select “ON” and then press
MENU
.
GAMMA
Selectsthegamma.USERsetsthegammatothesent
value (see page 36). (In PIP mode, the main side setting is
reectedintheimage.)
DISPLAY COLOR PATTERN
Displaysacolorpattern.Canbedisplayedwhilethemenu
screen is displayed, so you can refer to the pattern while
adjustingtheimage.
OFF ....................No pattern display.
WHITE ................Whitesinglecolorpatterndisplay.
RED ....................Red single color pattern display.
GREEN ...............Greensinglecolorpatterndisplay.
BLUE ..................Bluesinglecolorpatterndisplay.
USER.................. R e d/green/blue mixed color pattern display.
WhenUSERisselected,seteachcolor’s
level.
RESET
ResetsthevaluesofthePICTUREmenuitemstothefactory
preset values.
Select “ON” and then press
MENU
.
n
AUDIO
TREBLE
Adjuststhevolumeoftreble-levelsound.
BASS
Adjuststhevolumeofbass-levelsound.
BALANCE
Adjuststhebalanceoftheaudiosoundbetweenrightand
left.
RESET
ResetsthevaluesoftheAUDIOmenuitemstothefactory
preset values.
Select “ON” and then press
MENU
.
n
SETUP
OSD H-POSITION
Adjuststhehorizontaldisplaypositionofmenuscreen.
OSD V-POSITION
Adjuststheverticaldisplaypositionofmenuscreen.
SCREEN MOTION
Residual images are reduced by moving the screen.
PATTERN1 ..... The whole screen moves vertically and
horizontally.
PATTERN2 ..... A black screen spreads from the bottom of
the screen and then shrinks to the bottom of
the screen.
If the monitor is installed in the portrait
orientation, a black screen spreads from the
left end of the screen and then shrinks to the
left end of the screen.
PATTERN3 ..... A black bar moves from the left end to the
right end of the screen.
If the monitor is installed in the portrait
orientation, a black bar moves from the top
to the bottom of the screen.
PATTERN4 ..... Blackscreensappearfromboththetopand
bottom of the screen, and the displayed
imageiscompressedintothecentraleld.
If the monitor is installed in the portrait
orientation, the screen is compressed from
the left and right ends.
PATTERN1 PATTERN2
PATTERN4PATTERN3
MOTION TIME 1
Specifyatimeperiod(operatinginterval)untilSCREEN
MOTION starts.
MOTION TIME 2
SpecifyatimeperiodduringwhichSCREENMOTION
operates (time period during which the screen will move).
MONITOR
Select the installation direction of the monitor.
LANDSCAPE ............Landscape orientation
PORTRAIT ...............Portrait orientation
LANGUAGE
Sets the display language for the menu screen.
POWER ON DELAY
You can delay the screen display after the monitor is turned
on.Theperiodcanbesetupto60secondsinunitsofone
second.Whenthisfunctionisactivated,thepowerLED
ashes(atapprox.1secondinterval)inorange.Thisfunction
isdisabledwhen0isspecied.
STANDBY MODE
WhenSTANDARDisselected,startuptimefromstandby
mode is reduced. Note, however that, more power will be
consumed in standby mode.
WhenLOWPOWERisselected,currentconsumption
is reduced while the monitor is in standby mode. Note,
however, that the startup time from standby mode becomes
longer.
IfsettoLOWPOWER,certainRS-232Ccommandscannot
be used in standby mode, and control via LAN will be
disabled.
Menu Items