CUSTOMIZE 83
Call Settings
Call Block
Call Block lets you control which incoming calls, if any,
you wish to receive. Using Call Block you can elect to
automatically ignore calls from a List of specified
numbers, or to ignore calls received from specified
Contact Group(s).
1. In standby mode, press the MENU (left) soft
key ( ), then press (for
CUSTOMIZE), (for Settings),
(for Call), and for Call Block.
You’re prompted to enter the password for
your device.
Note: The default password is ‘0000’.
The following options appear in the display:
• Settings — Lets you enable/disable (turn Off)
Call Block; specify whether to ignore calls from
numbers in your Blocked List, Annoymous
numbers, or All Numbers; and/or assign a
Sound Effect (Off the Hook/Line is Busy/
Random)to be played to ignored calls.
• Blocked List — Lets you review and manage
the list of Ignored Numbers you selected in the
Call Log (for more information, see “Calls Log”
on page 28 and see “Review a Call” on page
29) or entered directly using Set Number.
• Blocked Group — Lets you ignore calls from one or more Contact Groups.
Tone Length
Use this menu to set DTMF settings to Short or Long.
1. In standby mode, press the MENU (left) soft key ( ), then press
(for CUSTOMIZE), (for Settings), (for Call), and for
Tone Length.The following options appear in the display:
•Short — Select for a brief tone
• Long — Select for an extended tone
2. Use the Up and Down navigation keys to highlight the Tone Length setting
of your choice, then press . Your setting is saved.
