135
3.
The
Airplane mode on/off
confirmation displays.
T-Coil Mode
T-Coil mode allows you to use a hearing aid with a T-coil setting
in connection with the handset. You can set this mode to
Enable
or
Disable
. When T-Coil Mode is activated, the icon displays
on the Idle screen.
T-Coil mode can be set to on or off.
1. In Idle mode, press Menu ➔ Settings ➔ Phone ➔ T-Coil
Mode and press the Select soft key or the key.
2. Select
Enable
or
Disable
and press the
Save
soft key.
3. Press the
Yes
soft key when the T-Coil confirmation
displays.
Important!:
The hearing aid category specified for this product represents
compatibility only when the phone is flipped open, which has
maximum antenna efficiency. When the option is enabled and the
phone is open during a call, the T-coil adjusts the audio for use
with T-coil hearing aids (see “FCC Hearing-Aid Compatibility
(HAC) Regulations for Wireless Devices” on page 160.)
Calls
This menu allows you to change the actions taken by the phone
when dialing and receiving calls.
ᮣ
In Idle mode, press Menu ➔ Settings ➔ Calls and press the
Select soft key or the key. The following options are
available.
General
This allows you to configure some common high level
parameters used by the phone for most types of calls.
Show My Number
This feature allows you to select how your ID is handled when an
outgoing call is initiated.
ᮣ
Highlight your selection and press the
Select
soft key or the
key. Selections are:
•Set by Network
: you are identified to the other party using the
default network information.
•Show Number
:
your identifying information displays to the
other party.
• Hide Number
: your identifying information is hidden from the
other party.
A847.book Page 135 Thursday, April 29, 2010 5:26 PM
