96 Settings
2. Use the up or down navigation key to select the Contact you want to call
and press .
Note: If there is more than one Contact entry that matches the last four or five
digits, a list is displayed that allows you to select the desired number to call.
Headset Mode
Headset Mode directs audio to either the headset exclusively or to both the headset
and the phone’s speaker. There are two options:
• Turbo Button: The ringer is routed through both the headset and the
phone’s speaker. The turbo button can be turned On or Off.
• Ringer Sound: All audio is routed through the Handset Only or Headset
Only. The phone’s ringer will not ring.
Note: This feature works with the wire headset and does not work with the
Bluetooth headset.
To change the Headset Mode:
1. Press for Menu.
2. Select Settings > More....
3. Select Headset Mode.
4. Select Ringer Sound.
5. Select either Handset Only or Headset Only and press .
Key Guard
The Key Guard feature helps to prevent accidental key presses when the handset is
in your pocket or purse. When the Key Guard is on, the buttons are disabled until
you unlock the phone. There are two settings available:
• On: Activates Key Guard feature.
• Off: Deactivates the Key Guard feature.
To change the Key Guard setting:
1. Press for Menu.
2. Select Settings > More....
3. Select Key Guard.
r351 BMC Guide.book Page 96 Friday, July 24, 2009 3:17 PM
