Select
5
Send to send the message.
If you decide not to send a message immediately, you
●
can save it to the draft folder for future use.
If an error occurs while you are sending a message, it
●
will be saved in the outbox so you can try to resend it
later.
When a message is sent successfully, it will be saved in
●
the sentbox.
›
Set up an MMS prole
To send and receive multimedia messages, you must activate
a connection prole for connecting to the MMS server. In
addition to proles that are preset by your service provider,
you can add your own connection prole.
In Menu mode, select
1
Settings
→
Connectivity
→
Network
→
Connections
→
Yes.
Select
2
Create.
Customise the parameters for the connection prole.
3
Option Function
Set name Enter the name for the prole.
Access name Enter the access point name.
Auth type Select an authentication type.
User ID Enter your user name.
Password Enter your password.
Protocol Select a network protocol.
Home URL Enter the MMS server address.
