A SERVICE OF

logo

Open as PDF
next previous
2. If you see the supply type prompt:
Select Supply Type: B
A)lign, B)lack Mark or D)ie Cut
• Press for black-mark or aperture supplies.
• Type D and press for die-cut supplies.
3. If you see the date prompt:
Enter new date: 01/01/89
(MM/DD/YY)
• Press only to keep the date shown, or to skip the
prompt.
• Enter a new date in the format shown in parentheses,
and press . The date format is selected in Printer
Configuration by management.
MM = 2 digit month
DD = 2 digit day
YY = 2 digit year
The date advances only while the power is on. During
printing, the slashes (/) are automatically generated.
9400 Series Operator’s Handbook
1-2