45
Sending Documents
Direct Transmission
If your machine’s memory is full or you wish to send the document real time, use Direct Transmission.
Manual Number Dialing (Direct Transmission)
To dial the telephone number manually, follow the steps below.
Set document(s) face down.
MEMORY
Make sure that the lamp is off. If not, press MEMORY to
set ”Off”.
Enter a telephone number from the keypad.
Ex: 5 5 5 1 2 3 4
START
Your machine starts to dial the telephone number.
1. If you need a special access number to get an outside line, dial it first then press
PAUSE
to enter a
pause (represented by a ”–”) before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, press
TONE
(represented by a ”/”).
The dialing mode will be changed from Pulse to Tone after dialing the digit ”/”.
Ex: 9 PAUSE TONE 5551234
3. To stop the transmission, press
STOP
.
The display shows:
COMMUNICATION STOP ?
1:YES 2:NO
Press
1
to stop the transmission. The Communication Journal will not print out regardless of the
printout mode setting of the Communication Journal.
04003000002
04003010005
04003040009
04003020001
04003990003
04003060074
#@multitude
04003060028
#@multitude
04003060026
04003060066
Note:
04003070007
#@multitude
04003070008
#@multitude
04003070030
#@multitude
ENTER STATION
00%
PRESS START TO DIAL
5551234
* DIALING *
5551234
4
1
2
3
4
