Overview 3
E-EQ-MX7RG-B MX7 Reference Guide
Important Battery Information
Note: The mobile device’s backup battery maintains its charge by drawing power from the
main battery pack. Always store unused devices with a fully charged main battery pack
installed. LXE recommends an in-use mobile device be frequently connected to an
external power source to maintain optimum power levels in the main battery pack and
the backup battery. When the backup battery and main battery pack are dead, the mobile
device reverts to the last saved setup defaults when a fully charged main battery pack is
installed and the device is powered On again.
Tap
| Settings | Control Panel | Battery tab.
• Until the main battery and backup battery are completely depleted, the MX7 is always
drawing power from the batteries (On).
• New batteries must be fully charged prior to use.
• Whenever possible, use the AC power adapter with the MX7 to conserve the main battery
and recharge the backup battery.
• When a new battery is installed in the MX7 for the first time (or when the backup battery is
completely depleted), the Time and Date reverts to its default values.
Tap
| Settings | Control Panel | Date/Time tab.
Note: Power drain increases substantially in Turbo mode (
| Settings | Control Panel |
Power).
When to Use This Guide
As the reference for LXE’s MX7 computer, this guide provides detailed information on its
features and functionality. Use this reference guide as you would any other source book – reading
portions to learn about the MX7, and then referring to it when you need more information about a
particular subject. This guide takes you through all aspects of installation and configuration for
the LXE MX7.
Operation and safety instructions for the general user are contained in the “MX7 User’s Guide.”
This chapter, “Introduction”, describes this reference guide’s structure, contains initial setup
instruction, briefly describes data entry processes, and explains how to get help.
Chapter 2 “Physical Description and Layout”, describes the function and layout of the MX7
components, controls and connectors. Also describes the external power supplies and vehicle
mounting options for the MX7.
Chapter 3 “System Configuration” takes you through the CE 5.0 operating system setup and the
MX7 file structure. Also describes and explains initial ActiveSync processes, MX7 specific
utilities and the LXE Login Utility.
Chapter 4 “AppLock” covers all aspects of the LXE AppLock program.
Chapter 5 “Wireless Network Configuration” details 2.4GHz radio setup. Configuration for
WEP and WPA is included.
Appendix A “Key Maps” describes the keypress sequences for the keypad. Custom Keymapping
instruction is included.
Appendix B “Technical Specifications” lists MX7 technical specifications.
